Jura IMPRESSA J9.4 One Touch TFT, Инструкция по эксплуатации

Страница: 17 / 52

17
2 Preparation
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
Precondition: ‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
T
Place a glass under the cappuccino frother.
T
Turn the setting wheel of the cappuccino frother to the Milk
Foam position
ü
.
T
Press the ‘Latte macchiato’ button.
‘Latte macchiato’ appears and the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E
There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Product settings’).
Coffee preparation starts. The preset amount of water flows
into the glass. Preparation stops automatically.
‘Please select
product:’ appears on the display.
To make sure the cappuccino frother always works properly, you
must rinse and clean it regularly (see Chapter 5 ‘Maintenance – Rins-
ing the cappuccino frother’).
Example:
Proceed as follows to prepare milk foam.
Precondition: ‘Please select product:’ is displayed. Milk is connected
to the cappuccino frother.
T
Place a cup under the cappuccino frother.
T
Turn the setting wheel of the cappuccino frother to the Milk
Foam position
ü
.
E
If you want to
heat the milk
turn the setting wheel of the cap-
puccino frother to the Milk position
z
.
Latte macchiato,
cappuccino
Warm milk and milk
foam