Jura IMPRESSA J9.4 One Touch TFT, Инструкция по эксплуатации

Страница: 19 / 52

19
2 Preparation
T
Press the ‘Espresso’ button.
Preparation starts. The preset amount of water for espresso
flows into the cup. Preparation stops automatically.
‘Please
select product:’ appears on the display.
It is easy to permanently adjust the amount of water for all products
to the cup size. Adjust the amount once as shown in the following
example. Every time you prepare a drink in the future, this amount
will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition: ‘Please select product:’ is displayed.
T
Place a cup under the coffee spout.
T
Press and hold the ‘Coffee’ button until ‘Enough water?
Press button’ appears.
T
Release the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
T
Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’ appears on the display.
E
You can alter this setting at any time by repeating the above
procedure.
E
The amount can be permanently adjusted to the cup size
for the products shown in the product selector too. To do
this, press and hold the Rotary Switch
k
until ‘Enough water?
Press button’ appears.
E
You can also permanently set the amount for all products in
programming mode (see Chapter 4 ‘Permanent settings in
programming mode – Product settings’).
Permanently setting the
amount of water for the
cup size