JUNO JH094C7, Руководство пользователя

Страница: 25 / 60

Problem Possible cause Remedy
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are
not set. Make sure that the settings
are correct.
The oven does not heat up. The fuse is blown. Make sure that the fuse is the
cause of the malfunction. If
the fuse is blown again and
again, contact a qualified
electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation set-
tle on the food and in the
cavity of the oven. You left the dish in the oven
for too long. Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
The display shows "12.00". There was a power cut. Reset the clock.
There is no good cooking
performance using the True
Fan Cooking PLUS function. You did not activate the True
Fan Cooking PLUS function. Refer to "Activating the True
Fan Cooking PLUS function".
There is no good cooking
performance using the True
Fan Cooking PLUS function. You did not fill the cavity em-
bossment with water. Refer to "Activating the True
Fan Cooking PLUS function".
The water in the cavity em-
bossment does not boil. The temperature is too low. Set the temperature at least
to 110 °C.
Refer to “Hints and tips”
chapter.
The water comes out of the
cavity embossment. There is too much water in
the cavity embossment. Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with a
cloth or sponge. Add the cor-
rect amount of water to the
cavity embossment. Refer to
the specific procedure.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
25