JUNO 949 723 405, Руководство пользователя

Страница: 29 / 64

Before you replace the lamp:
Turn off the oven. Wait until
the oven is cold.
Disconnect the oven from
the mains.
Put a cloth on the bottom of
the cavity.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
What to do if...
In any cases not included in this table
please contact with an Authorised Service
Centre.
Problem Check if...
The oven does not
heat up.
The fuse is blown.
The door gasket is
damaged.
Do not use the
oven. Contact an
Authorised Service
Centre.
The display shows
"12.00".
There was a power
cut. Set the time of
day.
The water leaks out
of the cavity em‐
bossment.
There is too much
water in the cavity
embossment.
Problem Check if...
Unsatisfying cook‐
ing performance of
the function: True
Fan Cooking
PLUS .
You filled the cavity
embossment with
water.
The lamp does not
work.
The lamp is burnt
out.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity. Do
not remove the rating plate from the oven
cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
29