manualshive.com logo in svg

Juniper TX MATRIX, Руководство по оборудованию

"Juniper TX MATRIX - современный аппаратный коммутатор, обеспечивающий высокую производительность сети. Для подробной информации по настройке и использованию устройства, скачайте бесплатное руководство по эксплуатации на manualshive.com. Hardware Manual доступен для загрузки в формате PDF."

Поделиться
Скачать
background image

12.

Commercial Computer Software.

The Software is “commercial computer software” and is provided with restricted rights. Use,

duplication, or disclosure by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS
227.7201 through 227.7202-4, FAR 12.212, FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.

13.

Interface Information.

To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer

with the interface information needed to achieve interoperability between the Software and another independently created program, on
payment of applicable fee, if any. Customer shall observe strict obligations of confidentiality with respect to such information and shall use
such information in compliance with any applicable terms and conditions upon which Juniper makes such information available.

14.

Third Party Software.

Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products

or technology are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement,
and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party
software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent
portions of the Software are distributed under and subject to open source licenses obligating Juniper to make the source code for such
portions publicly available (such as the GNU General Public License (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper
will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three
years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA

94089, ATTN: General Counsel. You may obtain a copy of the GPL at

http://www.gnu.org/licenses/gpl.html

, and a copy of the LGPL

at

http://www.gnu.org/licenses/lgpl.html

.

15.

Miscellaneous.

This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws

principles. The provisions of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes
arising under this Agreement, the Parties hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal
courts within Santa Clara County, California. This Agreement constitutes the entire and sole agreement between Juniper and the Customer
with respect to the Software, and supersedes all prior and contemporaneous agreements relating to the Software, whether oral or written
(including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an
authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained
herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in writing
by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity
of the remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the
Parties agree that the English version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de
même que tous les documents y compris tout avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that
this Agreement and all related documentation is and will be in the English language)).

Copyright © 2010, Juniper Networks, Inc.

vi

Содержание TX MATRIX













































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TX MATRIX

JB Systems Scene Master Operation Manual preview
Scene Master
Бренд: JB Systems Страницы: 24
JB Systems CMX 24 User Manual preview
CMX 24
Бренд: JB Systems Страницы: 61
Paradyne MCC Installation Instructions Manual preview
MCC
Бренд: Paradyne Страницы: 11
Paradyne Hotwire 8784 Installation Instructions Manual preview
Hotwire 8784
Бренд: Paradyne Страницы: 19
Paradyne Hotwire 7995 Installation Instructions Manual preview
Hotwire 7995
Бренд: Paradyne Страницы: 32
Paradyne COMSPHERE 3550 Series User Manual preview
COMSPHERE 3550 Series
Бренд: Paradyne Страницы: 153
Paradyne Jetstream CPX-1000 Reference Manual preview
Jetstream CPX-1000
Бренд: Paradyne Страницы: 141
Paradyne FrameSaver 9783 Installation Instructions Manual preview
FrameSaver 9783
Бренд: Paradyne Страницы: 28
Paradyne COMSPHERE 6800 Series Installation And Enabling/Disabling Instructions preview
COMSPHERE 6800 Series
Бренд: Paradyne Страницы: 7
Draytek Vigor 2710e Quick Start Manual preview
Vigor 2710e
Бренд: Draytek Страницы: 8
Lanner NCA-1526 User Manual preview
NCA-1526
Бренд: Lanner Страницы: 78
Juniper ACX2000 Hardware Manual preview
ACX2000
Бренд: Juniper Страницы: 190
Intellinet 523318 Instructions preview
523318
Бренд: Intellinet Страницы: 2
LogLogic LX 1010 Quick Start Manual preview
LX 1010
Бренд: LogLogic Страницы: 30
Mercusys MR30G Quick Installation Manual preview
MR30G
Бренд: Mercusys Страницы: 35
ICT Protege PRT-PX16-PCB Installation Manual preview
Protege PRT-PX16-PCB
Бренд: ICT Страницы: 34
Planet ADSL 2/2+ VPN Firewall Router ADE-4300A/B User Manual preview
ADSL 2/2+ VPN Firewall Router ADE-4300A/B
Бренд: Planet Страницы: 132
Netis DL4305 Quick Installation Manual preview
DL4305
Бренд: Netis Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды