NOTE: Ensure that the rear of the device is supported while you mount the SSR1300 in the
rack.
7.
While you’re holding the SSR1300 in place, have a second person insert and tighten the rack-mount
screws to secure the front mounting brackets to the rack rails. Make sure to tighten the screws in
the two bottom holes first and then tighten the screws in the two top holes next.
Figure 10: Install the SSR1300 Appliance in a Four-Post Rack
8.
Continue to support the SSR1300 in place and have the second person slide the rear mounting
blades into the channels of the side mounting rails.
9.
Secure the rear mounting blades on each side of the chassis to the rack post, using rack mounting
screws.
Figure 11: Install the Rear Mounting Blades on an SSR1300 Appliance
29
