Juniper OCX1100, Руководство по оборудованию

Страница: 33 / 204

Table 7 on page 13 describes the chassis status LEDs on an OCX1100-48SX switch, their
colors and states, and the status they indicate. You can view the colors of the four LEDs
directly on the chassis or remotely through the CLI by issuing the operational mode
command
show chassis led
.
Table 7: Chassis Status LEDs on an OCX1100-48SX Switch
State and Description Color LED Label
•
Blinking—Locator function is enabled.
• Off—Locator function is disabled.
Locator is used to show where the device is.
Blue LOCATOR
• On steadily—POST (power-on self-test) passed. Normal operation.
• Blinking—POST in progress.
• Off—The switch is powered off or is halted.
Green STAT (Status)
Blinking—POST, power supply, or fan module failed. System too hot. Amber
• On steadily—Power on.
•
Off—Power off. No power cable attached.
Green
PWR
(Power)
Blinking—One of the power supply failed. Amber
• On steadily—Normal operation.
•
Off—Not receiving power.
Green
FAN
Blinking—Fan failure. Amber
All four LEDs can be lit simultaneously.
Related
Documentation
OCX1100 Switches Hardware Overview on page 3
•
Management Port LEDs and Console Port LEDs on OCX1100 Switches
The management port—labeled MGMT — and the console port—labeled CONSOLE — on
the front panel of an OCX1100 switch have two LEDs each that indicate link and activity
and status of the ports. The status LED on the management port and the link and activity
LED on the console port are inactive LEDs.
Figure 6 on page 14 shows the location of
LEDs on the management port and the console port of an OCX1100-48SX switch.
13 Copyright © 2017, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions