Juniper NETWORK AND SECURITY MANAGER 2010.3 Скачать руководство пользователя страница 734

Страница: 734 / 1016

Table 72: VSD/RTO Summary

Description

Item

The name of the cluster associated with this VSD.

Cluster

The name of this VSD (or RTO).

VSD(RTO)

The total number of security devices that are associated with
this VSD.

No of Devices

The initial hold time state (in seconds) of the VSD.

Init Hold Time (sec)

The time interval (in milliseconds) between each heartbeat.

Heartbeat Interval (ms)

Threshold level required to change over to the backup security
device.

Heartbeat Lost Threshold (ms)

The master system.

Master

The primary backup system.

Primary Backup

Viewing VSD Counter Details

Click the

Counters

tab to view specific information about your VSD counters. Table 73

on page 684 describes the information that is available from the VSD counters view:

Table 73: VSD Counter Details

Description

Item

The devices that are associated with the VSD or RTO.

Device

The number of units associated with the VSD or RTO.

Number of Units

The number of times a device changes operational states.

State Change Counter

The transient state of a VSD or RTO group member while it was in
the process of joining the VSD or RTO group.

Init Counter

The number of master devices.

Master

The number of primary backup devices.

Primary BackUp

The total number of backup devices.

BackUp

An administrator purposefully assigned a device so that it cannot
participate in selecting a new master device.

Ineligible

A VSD or RTO group device has an internal problem.

InOperable

The number of conflicts that occurred on the master device.

Master Conflict

684

Network and Security Manager Administration Guide

Содержание NETWORK AND SECURITY MANAGER 2010.3


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.3

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.3

Бренды по названию

Популярные бренды

Juniper NETWORK AND SECURITY MANAGER 2010.3, Руководство администратора

Результаты поиска

Содержание NETWORK AND SECURITY MANAGER 2010.3

Отзывы:

Похожие инструкции для NETWORK AND SECURITY MANAGER 2010.3

Бренды по названию

Популярные бренды