Juniper MX2010, Руководство по оборудованию

Страница: 681 / 825

Maintaining Cables That Connect to MX2010 MPCs or MICs
Purpose
For optimum router performance, verify the condition of the cables that connect to the MPCs or MICs.
Action
On a regular basis:
•
Use the lower cable manager (shown in Figure 319 on page 607 ) to support cables and prevent cables
from dislodging or developing stress points.
Figure 322: Lower Cable Manager Cable Routing
g007424
LC 10 11 12 13 14 15 16 17 18 19
NOTE: The MX2010 supports a standard and extended upper and lower cable manager.
•
Place excess cable out of the way in the lower cable manager. Do not allow fastened loops of cable to
dangle from the connector or cable manager because this stresses the cable at the fastening point.
Putting fasteners on the loops helps to maintain their shape.
•
Keep the cable connections clean and free of dust and other particles, which can cause drops in the
received power level. Always inspect cables and clean them, if necessary, before connecting an interface.
•
Label both ends of the cables to identify them.
665