Known Problems and Limitations
61
Release 11.1.0
System Logging
The
show configuration category management syslog virtual-router default
command incorrectly displays logs for multiple syslog destinations when you
add a log to only one syslog destination. The
show log configuration
command shows the correct configuration. [Defect ID 84082]
TCP
The SRP module resets in any of the following circumstances on an E320
router that has a line module configured with 5000 ANCP adjacencies: [Defect
ID 176916]
When you issue the
issu initialization
command from the console and
then reload the line module from a Telnet session.
When the client that has the 5000 ANCP clients resets or an intermediate
switch resets.
When you reload the line module.
Unified ISSU
ATM line modules might reset after a unified ISSU when you attempt to add
memory to a VLAN subinterface in a large bridged Ethernet configuration.
[Defect ID 178798]
Under certain conditions, a unified ISSU from JUNOSe Release 9.2.0p1-0 to the
current release fails, and causes the SRP module and the ES2 4G LM to reset.
[Defect ID 179975]
When any of the subsystems is excluded for a JUNOSe release, a unified ISSU
to that release fails to apply conversion code to all of the line modules. As a
result, the line modules reset when they come up with that release. [Defect ID
179595]
Work-around:
To prevent the exclusion of a subsystem file from the release,
do the following before you upgrade to a new JUNOSe release that supports
unified ISSU:
1.
Issue the
show subsystems file
fileName
.rel
command, where
fileName
is
the name of the software release file, to determine whether any of the
subsystem files are excluded from the release.
2.
For each subsystem file that is excluded, issue the
no exclude-subsystem
subsystemName
command to remove the exclusion for the specified
subsystem file.
If you copied the software release to the router before removing the subsystem
file from the exclusion list, you must copy the release to the router again to
ensure that all subsystem files are included in the release.
Unified ISSU is not supported with 8000 bridged Ethernet interfaces on an
OC3/STM1 GE/FE ATM line module. [Defect ID 178811/178797/
179547]
