JUNOSe 11.1.0 Release Notes
18
Unsupported Features
Subscriber Interfaces on the ES2 10G Uplink LM
You can configure dynamic subscriber interfaces and static subscriber
interfaces on the ES2 10G Uplink LM using the CLI. However, configuring
subscriber interfaces on the ES2 10G Uplink LM provides no benefit because
access features such as per-subscriber QoS are unavailable on the module.
Multicast
Unsupported IPv6 Data MDT Commands in CLI
The
ipv6 pim data-mdt
command and the
show ipv6 pim data-mdt
commands are unsupported in the current release.
The IPv6 PIM Data MDT Configuration mode is unsupported in this release. The
following commands appear in IPv6 PIM Data MDT Configuration mode but are
unsupported in the current release:
Policy Management
External Parent Groups Unsupported on ES2 10G, ES2 10G Uplink, and ES2
10G ADV LMs
External parent groups are not supported on the ES2 10G, ES2 10G Uplink, and
ES2 10G ADV LMs. If you create a policy that references an external parent
group on these LMs, the system prevents you from attaching it to the LM
interface and you receive an error message.
Stateful SRP Switchover (High Availability)
Stateful SRP Switchover for Certain Applications
The stateful SRP switchover feature has not been qualified for the following
applications:
ipv6 pim join-filter
mdt-data-timeout
ipv6 pim query-interval
route map
mdt-data-delay
tunnel group-address-pool
mdt-data-holdown
tunnel source
Remote Access
DHCP proxy client
L2TP dialout