Juniper BGP, Руководство по настройке

Страница: 712 / 748

Route Distinguisher (RD) is 100:23
Original Route Distinguisher (RD) is 100:23
MPLS in-label is none
MPLS in-label block size is 0
MPLS out-label is 106
MPLS out-label block size is 10
Next hop IP address is 2.2.2.2 (metric 3)
Multi-exit discriminator is not present
Local preference is 100
Weight is 0
Origin is IGP
AS path is empty
Extended communities RT:100:3 Layer2:atm-vcc-cell:use-cw,use-seq,:mtu=0
Status Vector 0x7fc0
Meaning
Table 105 on page 676 lists the show ip bgp l2vpn command output fields
Table 105: show ip bgp l2vpn Output Fields
Field Description Field Name
IP address of the local PE router Local BGP identifier
Autonomous system number local AS
Version number of the local routing information base Local-RIB version
Version number of the forwarding information base FIB version
Status codes for the route, listed before the Prefix:
■
>—best route
■
*—invalid route
■
s—suppressed route
■
d—dampened route
■
r—rejected route
■
a—auto-summarized
■
m—multihomed backup route
Status codes
Route prefix in the format siteID : blockOffset Prefix
IP address of the peer from which the route was learned Peer
IP address of the next router that is used when a packet is
forwarded to the destination network Next-hop (or Next hop IP
address)
Multiexit discriminator for the route MED
Local preference for the route LocPrf
Weight of the route Weight
Origin of the route Origin
AS path through which this route has been advertised AS Path
676 ■
Monitoring BGP-Related Settings for VPWS L2VPNs
JUNOSe 11.1.x BGP and MPLS Configuration Guide