Juniper BGP, Руководство по настройке

Страница: 526 / 748

Reachable (metric 0)
Number of direct next-hops is 1
Direct next-hop ATM4/0.61 (10.61.61.2)
Resolution in IP tunnel-route table of VRF pe22
Not reachable
Reference count is 2
■
See show ip bgp next-hops.
show ip interface vrf
■
Use to display information about the interfaces associated with the specified
VRF.
■
Field descriptions
■
interface—Interface type and interface specifier
■
interface status—Status of the interface
■
line protocol—Status of the line protocol
■
Link up/down trap—Status of SNMP link up/down traps on the interface
■
Internet address—IP address of the interface
■
Operational MTU—Actual MTU for the interface
■
Administrative MTU—Configured MTU for the interface
■
Operational speed—Actual speed
■
Administrative speed—Configured speed
■
Discontinuity Time—Value of sysUpTime the last time the integrity of the
interface statistics was compromised
■
Router advertisement—Whether routes are advertised; enabled or disabled
■
Administrative debounce-time—Configured debounce behavior, enabled or
disabled. If enabled, indicates time in milliseconds that the router waits
before generating an up or down event in response to a state change in the
interface. If the state changes back before the debounce timer expires, no
state change is reported.
■
Operational debounce-time—Current debounce behavior, enabled or disabled.
If enabled, indicates time in milliseconds that the router waits before
generating an up or down event in response to a state change in the interface.
If the state changes back before the debounce timer expires, no state change
is reported.
■
Access routing—When enabled, an access route is installed to the host on
the other end of the interface
■
Multipath mode—Algorithm used for ECMP: hashing of destination address
and source address, or round-robin
490 ■
Monitoring BGP/MPLS VPNs
JUNOSe 11.1.x BGP and MPLS Configuration Guide