JUNIOR JONES J-Carbon, Инструкция по эксплуатации

Страница: 7 / 13

J-CARBON Instruction Manual
J-CARBON Instruction Manual
23 24
7. Operating the parking brake
Press down on the pedal to engage the parking brake (fig. 21).
Press down again to release the brake.
WARNING:
never leave your stroller without fully
engaging the parking brake.
8. Adjusting the handle height
Twist the barrel on the handle forward and move the handle upwards
until it is in the desired position (fig. 22 & 23).
When folding the J-CARBON always ensure that the handle is in the
lowest position.
9. Attaching and removing the bumper bar
Insert the bumper bar into the housings on both sides of the seat unit
(fig. 24).
Press the buttons on either side of the bumper bar to release (fig. 25).
10. Swing away bumper bar
Press the button on one side of the bumper bar to swing away,
this allows easy access to your child (fig. 26).
11. Reclining the seat unit
Lift the handle located on the rear of the seat unit (fig. 27 & 28).
Recline into the desired position (fig. 29 & 30).
Use the same handle to raise the seat unit back into a seated position.
The seat unit has 3 recline positions and is suitable from birth in the
lie-flat position.
12. Removing and attaching the back panel
Slide your fingers into the bottom of the back panel and pull away from
the seat back (fig. 31).
The back panel is magnetic and will attach easily when placed back
into position.
13. Adjusting the hood height
Pinch the bottom slider buttons inwards and push up or down to adjust
the hood into the desired position (fig. 32).
Always ensure that the hood is in the lowest position before attempting
to fold the chassis.