JUNIOR JONES J-Carbon, Инструкция по эксплуатации

Страница: 8 / 13

J-CARBON Instruction Manual
J-CARBON Instruction Manual
25 26
17. Removing the seat unit
Lift the seat part of the seat unit upwards to meet the back rest (fig. 39).
Drop the seat unit forwards into a horizontal position (fig. 40) and lift off
the chassis (fig. 41).
18. Attaching the seat unit in parent-facing mode
Slide the seat unit into the chassis housings with the seat facing the
rear of the stroller (fig. 42).
Lift the back rest into a seated position (fig. 43).
WARNING:
ensure the seat unit is locked in place on the
chassis before use.
19. Using the J-CARBON with a Group 0 Car Seat
Slide the car seat adaptors into the housings on the chassis (fig. 44).
The car seat adaptors are labelled L and R. This is from the perspective
of you standing behind the chassis.
The adaptors will lock into place with a click.
WARNING:
ensure the car seat adaptors are locked in place
before use.
14. Adjusting the shoulder strap height
Pinch the top slider buttons inwards and push up or down to adjust the
shoulder harness into the desired position (fig. 33).
Always ensure that the harness is a comfortable fit on your child’s shoulders.
WARNING:
to avoid serious injury always use a
5-point safety harness.
15. Operating the 5-point safety harness
To fasten the harness bring together the left and right sections of the
shoulder straps (fig. 34) and push into the main buckle housing on the
crotch strap until they click into place (fig. 35).
WARNING:
to avoid injury always use the 5-point safety harness.
To open the harness, press the button on the buckle housing (fig. 36).
16. Adjusting the 5-point safety harness
The waist strap and shoulder strap are adjustable to grow with your child.
Simply slide the harness through the adjusters to the desired position
(fig. 37 & 38).
WARNING:
to avoid injury always use the 5-point safety harness.