Jungheinrich KMS 100, Руководство по эксплуатации

Страница: 63 / 67

1298
.GB
F 12
5.10 Hydraulic oil
– Prepare the truck for the performance of servicing and maintenance operations.
m
Under no circumstances oil may be allowed to enter the ground or the sewer system.
Waste oil must be securely stored until it is disposed of properly.
Draining the oil:
Take out the vent filter (8) and remove oil
by suction. If this is not possible, the oil
can be drained at the bottom of the hy-
draulic reservoir after unscrewing the oil
drain plug.
Refilling oil:
Remount the oil drain plug. Fill with hy-
draulic oil to the upper level mark (max.)
at the oil dip stick (10). Remount the vent
filter.
Check hydraulic oil level:
With the hoisting frame fully lowered,
check whether the hydraulic oil level is between minimum and maximum mark of the
oil dip stick (10).
If not, refill new hydraulic oil up to the correct level.
5.11 Hydraulic hoses
The hydraulic hose lines must be replaced after a service life of 6 years, see “Safety
Regulation for Hydraulic Hose Lines ZH 1/74”.
5.12 Checking the brake fluid
f
Brake fluid is poisonous and must only
be stored in closed original containers.
Furthermore, be aware that brake fluid is
aggressive to the trucks painted sur-
faces.
The brake fluid is filled in the factory and
must be changed at least after two
years, since the brake fluid changes in
the course of time and loses its original
characteristics.
The brake fluid reservoir (11) is located
in the rear of the truck and can be acces-
sed after removing the cover. The brake
fluid reservoir should always be filled up
to 2 cm below the reservoir’s closing cap.
The stipulated brake fluid must be used.
The braking system must always be sealed tightly.
1298
.GB
F 12
5.10 Hydraulic oil
– Prepare the truck for the performance of servicing and maintenance operations.
m
Under no circumstances oil may be allowed to enter the ground or the sewer system.
Waste oil must be securely stored until it is disposed of properly.
Draining the oil:
Take out the vent filter (8) and remove oil
by suction. If this is not possible, the oil
can be drained at the bottom of the hy-
draulic reservoir after unscrewing the oil
drain plug.
Refilling oil:
Remount the oil drain plug. Fill with hy-
draulic oil to the upper level mark (max.)
at the oil dip stick (10). Remount the vent
filter.
Check hydraulic oil level:
With the hoisting frame fully lowered,
check whether the hydraulic oil level is between minimum and maximum mark of the
oil dip stick (10).
If not, refill new hydraulic oil up to the correct level.
5.11 Hydraulic hoses
The hydraulic hose lines must be replaced after a service life of 6 years, see “Safety
Regulation for Hydraulic Hose Lines ZH 1/74”.
5.12 Checking the brake fluid
f
Brake fluid is poisonous and must only
be stored in closed original containers.
Furthermore, be aware that brake fluid is
aggressive to the trucks painted sur-
faces.
The brake fluid is filled in the factory and
must be changed at least after two
years, since the brake fluid changes in
the course of time and loses its original
characteristics.
The brake fluid reservoir (11) is located
in the rear of the truck and can be acces-
sed after removing the cover. The brake
fluid reservoir should always be filled up
to 2 cm below the reservoir’s closing cap.
The stipulated brake fluid must be used.
The braking system must always be sealed tightly.