Jungheinrich KMS 100, Руководство по эксплуатации

Страница: 60 / 67

F 9
1298
.GB
5 Description of servicing operations
5.2 Prepare the truck for the performance of servicing and maintenance operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Park the truck and render it safe (refer to chapter E).
– Disconnect the battery plug to prevent accidental starting of the truck.
– When work has to be performed under the jacked-up truck, suitable measures must
be taken to prevent any dropping, tilting or slipping of the truck.
f
When lifting the truck, the instructions contained in chapter “Transportation and Com-
missioning” have to be observed (refer to chapter C).
5.3 Securing the driver platform
The driver platform can be secured in
elevated position.
– Lift the driver platform until the inner
mast (1) is positioned above the carri-
er of the load lifting safety device.
– Screw out the fastening screw (4) and
dismount the safety bolt (3) from the
carrier (2) at the hoisting frame (5).
– Position the safety bolt to the vertical
hole of the carrier and screw on.
– Lower the driver platform very slowly
until the inner mast rests on the safety
bolt.
5.4 Cleaning the hoisting chains
m
It is very important to keep all hoisting
chains and swivels are kept clean and
well greased. Hoisting chains are safety
elements.
The chains must not show any consi-
derable dirt accumulations. Cleaning is
only allowed with paraffin derivatives,
e.g. kerosene or Diesel oils.
Never clean chains with high-pressure
steam cleaners, cold cleaners, or chemi-
cal cleaning solutions.
F 9
1298
.GB
5 Description of servicing operations
5.2 Prepare the truck for the performance of servicing and maintenance operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Park the truck and render it safe (refer to chapter E).
– Disconnect the battery plug to prevent accidental starting of the truck.
– When work has to be performed under the jacked-up truck, suitable measures must
be taken to prevent any dropping, tilting or slipping of the truck.
f
When lifting the truck, the instructions contained in chapter “Transportation and Com-
missioning” have to be observed (refer to chapter C).
5.3 Securing the driver platform
The driver platform can be secured in
elevated position.
– Lift the driver platform until the inner
mast (1) is positioned above the carri-
er of the load lifting safety device.
– Screw out the fastening screw (4) and
dismount the safety bolt (3) from the
carrier (2) at the hoisting frame (5).
– Position the safety bolt to the vertical
hole of the carrier and screw on.
– Lower the driver platform very slowly
until the inner mast rests on the safety
bolt.
5.4 Cleaning the hoisting chains
m
It is very important to keep all hoisting
chains and swivels are kept clean and
well greased. Hoisting chains are safety
elements.
The chains must not show any consi-
derable dirt accumulations. Cleaning is
only allowed with paraffin derivatives,
e.g. kerosene or Diesel oils.
Never clean chains with high-pressure
steam cleaners, cold cleaners, or chemi-
cal cleaning solutions.