Jungheinrich KMS 100, Руководство по эксплуатации

Страница: 53 / 67

1298
.GB
F 2
Working on the electrical installation: All work on the electrical installation must be
carried out only by electrotechnically skilled personnel. Before commencing any work
on the electric system, all measures required to prevent electric shocks have to be
taken. For battery-operated floor conveyors, the floor conveyor must also be depowe-
red by removing the battery plug.
Welding operations: To prevent any damage to electric or electronic components,
these have to be removed from the fork-lift truck before any welding operations are
undertaken.
Settings: When repairing or replacing hydraulic, electric or electronic components or
assemblies, all truck-specific settings have to be retained.
Tire equipment: The quality of the tires greatly affects the stability and the driving
behaviour of the fork-lift truck. Modifications must only be carried out after discussion
with the manufacturer. When replacing wheels or tires, it must be ensured that the
truck remains level (tires and wheels must always be replaced in pairs, i.e. left and
right together).
Lift chains: The lift chains wear rapidly if not lubricated. The intervals stated in the
service checklist apply for use in normal environment. For applications in aggravated
conditions (dust, temperature), frequent re-lubrication must be performed. Use the
correct chain spray oil as prescribed. The mere exterior application of grease does
not provide sufficient lubrication.
Hydraulic hoses: The hoses must be replaced after a service life of six years. When
replacing hydraulic components the hoses in this hydraulic system should be repla-
ced.
1298
.GB
F 2
Working on the electrical installation: All work on the electrical installation must be
carried out only by electrotechnically skilled personnel. Before commencing any work
on the electric system, all measures required to prevent electric shocks have to be
taken. For battery-operated floor conveyors, the floor conveyor must also be depowe-
red by removing the battery plug.
Welding operations: To prevent any damage to electric or electronic components,
these have to be removed from the fork-lift truck before any welding operations are
undertaken.
Settings: When repairing or replacing hydraulic, electric or electronic components or
assemblies, all truck-specific settings have to be retained.
Tire equipment: The quality of the tires greatly affects the stability and the driving
behaviour of the fork-lift truck. Modifications must only be carried out after discussion
with the manufacturer. When replacing wheels or tires, it must be ensured that the
truck remains level (tires and wheels must always be replaced in pairs, i.e. left and
right together).
Lift chains: The lift chains wear rapidly if not lubricated. The intervals stated in the
service checklist apply for use in normal environment. For applications in aggravated
conditions (dust, temperature), frequent re-lubrication must be performed. Use the
correct chain spray oil as prescribed. The mere exterior application of grease does
not provide sufficient lubrication.
Hydraulic hoses: The hoses must be replaced after a service life of six years. When
replacing hydraulic components the hoses in this hydraulic system should be repla-
ced.