Jungheinrich KMS 100, Руководство по эксплуатации

Страница: 59 / 67

1298
.GB
F 8
4.1 Operating material
Handling operating material: Consumption type material must always be handled
properly. Manufacturer's instructions to be observed.
f
Improper handling endangers health, life and environment. Operating material must
only be stored in containers conforming to specification. They might be inflammable
and must not come into contact with hot components or open fire.
When filling in consumption type materials, use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualities, except if mixing is
expressively prescribed in these operating instructions. -This instruction may only be
ignored, if another mixing ratio is explicitly prescribed in this manual.
Avoid any spilling. Spilled liquid must be removed immediately using a suitable bin-
ding agent, and the mixture of consumption type material and binding agent is to be
disposed of according to the regulations.
* In addition 2% additive 68/D from Dea Fuchs
Qty Description Used for:
*A 33 l Hydraulic oil
H-LPD22 Hydraulic system
B 2.5 l SAE 80 EP API GL 4 Transmission
D 0.18 l SAE J 1703
FMVSS 116
DOT 3 and DOT 4 Hydraulic
braking system
E Multi-purpose Lithium
grease KP 2 (N)
DIN 51502 General
F Multi-purpose Lithium
grease
KPF L2 N (M) with MOS
2
DIN 502
Toothed racks
G Chain spray Hoisting chains
H High-temperature grease Front wheel bearings
1298
.GB
F 8
4.1 Operating material
Handling operating material: Consumption type material must always be handled
properly. Manufacturer's instructions to be observed.
f
Improper handling endangers health, life and environment. Operating material must
only be stored in containers conforming to specification. They might be inflammable
and must not come into contact with hot components or open fire.
When filling in consumption type materials, use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualities, except if mixing is
expressively prescribed in these operating instructions. -This instruction may only be
ignored, if another mixing ratio is explicitly prescribed in this manual.
Avoid any spilling. Spilled liquid must be removed immediately using a suitable bin-
ding agent, and the mixture of consumption type material and binding agent is to be
disposed of according to the regulations.
* In addition 2% additive 68/D from Dea Fuchs
Qty Description Used for:
*A 33 l Hydraulic oil
H-LPD22 Hydraulic system
B 2.5 l SAE 80 EP API GL 4 Transmission
D 0.18 l SAE J 1703
FMVSS 116
DOT 3 and DOT 4 Hydraulic
braking system
E Multi-purpose Lithium
grease KP 2 (N)
DIN 51502 General
F Multi-purpose Lithium
grease
KPF L2 N (M) with MOS
2
DIN 502
Toothed racks
G Chain spray Hoisting chains
H High-temperature grease Front wheel bearings