Jungheinrich ETX ac 125, Руководство по эксплуатации

Страница: 79 / 89

501
1
838
6 GB
F 6
Maintenance intervals
Standard =
t
W
1
M
3
M
6
M
12
Lifting device 10.1 Apply grease to rollers and lateral running surfaces of
the guide rollers in the lifting mast profiles and in the
swivel/traverse unit.
f
Attention: Danger of falling down!
t
10.2 Check lifting mast attachment
t
10.3 Check the lifting chains and chain guide for wear, adjust
and grease
t
10.4 Perform sight check of rollers, sliding elements, and
stops
t
10.5 Check lifting mast bedding
t
10.6 Check fork arms and fork arm carriage for wear and
damage
t
10.7 Grease all lubrication locations of the guide rollers of the
lifting mast
t
Load-carrying
attachments 11.1 Performance check
t
11.2 Check secure attachment at truck and supporting
elements
t
11.3 Check bearings, guides, and stops for wear and
damage; clean and grease, also grease the toothed
racks
t
11.4 Check eccentric bolt and glide bar adjustment at swivel/
traverse frame and re-adjust, if necessary.
t
11.5 Grease guide rollers and swivel bearing of the swivel/
traverse fork.
t
Lubrication: 12.1 Grease the industrial truck in accordance with the
lubrication schedule
t
General
measure-
ments: 13.1 Check the electrical system for a grounding fault
t
13.2 Check travel speed and braking distance
t
13.3 Check lifting and lowering speed
t
13.4 Check cut-off functions
t
13.5 IG: Measure current in guide wire and adjust, if
necessary
t
13.6 Check travel behaviour on IG wire and maximum
deviation and re-adjust, if necessary
t
13.7 Check tracking-in mode on the IG wire for aisle tracking
t
13.8 Check EMERGENCY STOP function of IG
t
Demonstra-
tion: 14.1 Perform trial run under nominal load
t
14.2 Upon completion of servicing operations, demonstrate
the vehicle to the person responsible
t
501
1
838
6 GB
F 6
Maintenance intervals
Standard =
t
W
1
M
3
M
6
M
12
Lifting device 10.1 Apply grease to rollers and lateral running surfaces of
the guide rollers in the lifting mast profiles and in the
swivel/traverse unit.
f
Attention: Danger of falling down!
t
10.2 Check lifting mast attachment
t
10.3 Check the lifting chains and chain guide for wear, adjust
and grease
t
10.4 Perform sight check of rollers, sliding elements, and
stops
t
10.5 Check lifting mast bedding
t
10.6 Check fork arms and fork arm carriage for wear and
damage
t
10.7 Grease all lubrication locations of the guide rollers of the
lifting mast
t
Load-carrying
attachments 11.1 Performance check
t
11.2 Check secure attachment at truck and supporting
elements
t
11.3 Check bearings, guides, and stops for wear and
damage; clean and grease, also grease the toothed
racks
t
11.4 Check eccentric bolt and glide bar adjustment at swivel/
traverse frame and re-adjust, if necessary.
t
11.5 Grease guide rollers and swivel bearing of the swivel/
traverse fork.
t
Lubrication: 12.1 Grease the industrial truck in accordance with the
lubrication schedule
t
General
measure-
ments: 13.1 Check the electrical system for a grounding fault
t
13.2 Check travel speed and braking distance
t
13.3 Check lifting and lowering speed
t
13.4 Check cut-off functions
t
13.5 IG: Measure current in guide wire and adjust, if
necessary
t
13.6 Check travel behaviour on IG wire and maximum
deviation and re-adjust, if necessary
t
13.7 Check tracking-in mode on the IG wire for aisle tracking
t
13.8 Check EMERGENCY STOP function of IG
t
Demonstra-
tion: 14.1 Perform trial run under nominal load
t
14.2 Upon completion of servicing operations, demonstrate
the vehicle to the person responsible
t