Jungheinrich ETX ac 125, Руководство по эксплуатации

Страница: 62 / 89

E 33
501
1
838
6 GB
4.4 Picking up, transporting, and putting down load units
m
Before picking up a load unit the driver must make sure that it has been correctly
palletised and does not exceed the permissible capacity of the truck. Observe
carrying capacity diagram!
– Manually adjust the fork arms or reposition hydraulically, if necessary.
f
The fork arms must be adjusted in such a way that both have the same distance to
the outside edges of the fork arm carriage and the load centre is centred between the
fork arms. Fork arms must be locked!
Picking up a load sideways
– Carefully approach the load to be
picked up in parallel to the load.
– Release foot switch.
– Fully lower the load-carrying unit
respectively lift to the proper height
with respect to the load, so that the
fork arms can be inserted under the
load without damaging it.
f
Lifting person is prohibited.
– Carefully insert the load-carrying unit
under the load until it makes contact
with the back of the fork.
f
The fork arms must be inserted into the
load with their full length.
– Lift the load-carrying unit slightly so
that the load is clear off the ground.
– Shift load-carrying unit in transport
position.
A
The swivel/traverse fork must be
swivelled crossways to the travel
direction and must be positioned in left
respectively right transport position.
f
Make sure that nobody steps under the
lifted load.
– Once in the front yard, lower the load
to transport height.
The picked up load can now be
transported.
E 33
501
1
838
6 GB
4.4 Picking up, transporting, and putting down load units
m
Before picking up a load unit the driver must make sure that it has been correctly
palletised and does not exceed the permissible capacity of the truck. Observe
carrying capacity diagram!
– Manually adjust the fork arms or reposition hydraulically, if necessary.
f
The fork arms must be adjusted in such a way that both have the same distance to
the outside edges of the fork arm carriage and the load centre is centred between the
fork arms. Fork arms must be locked!
Picking up a load sideways
– Carefully approach the load to be
picked up in parallel to the load.
– Release foot switch.
– Fully lower the load-carrying unit
respectively lift to the proper height
with respect to the load, so that the
fork arms can be inserted under the
load without damaging it.
f
Lifting person is prohibited.
– Carefully insert the load-carrying unit
under the load until it makes contact
with the back of the fork.
f
The fork arms must be inserted into the
load with their full length.
– Lift the load-carrying unit slightly so
that the load is clear off the ground.
– Shift load-carrying unit in transport
position.
A
The swivel/traverse fork must be
swivelled crossways to the travel
direction and must be positioned in left
respectively right transport position.
f
Make sure that nobody steps under the
lifted load.
– Once in the front yard, lower the load
to transport height.
The picked up load can now be
transported.