Jungheinrich ETX ac 125, Руководство по эксплуатации

Страница: 76 / 89

F 3
501
1
838
6 GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the fork lift truck. The neglect of regular servicing intervals can lead to
fork lift truck failure and constitutes a potential hazard to personnel and equipment.
m
The indicated servicing intervals are based on single-shift operation under normal
operating conditions. For applications in dusty environments, or involving large
temperature fluctuations or multiple-shift operation, the servicing intervals must be
shortened accordingly.
The following servicing checklist indicates the operations to be performed and the
respective intervals to be observed. The servicing intervals are defined as follows:
W1 = every 50 operating hours, but at least once per week
M3 = every 500 operating hours, but at least every 3 months
M6 = every 1000 operating hours, but at least every 6 months
M12 = every 2000 operating hours, but at least every 12 months
In the running-in phase of the truck, the following additional operations have to be
carried out:
1. Inspection
After the first 50 to 100 operating hours, at the latest after four weeks:
– Retighten battery terminal screws and check condition of cell connectors.
– Perform visual checks of electrical and mechanical components.
– Check brake fluid.
– Check brake system for leaks and brake lines for free routing.
– Check lifting chains for uniform tension.
– Check locking and limits of fork arms.
– Check transmissions for leaks.
– Check screw connections and mechanical safety devices for tight seat.
– Check wheel nuts for tight seat and retighten, if required.
– Check hydraulic connections for leaks and retighten, if required.
– Check hydraulic and travel speed setting as well as inductive guidance and function
of the stationary equipment.
F 3
501
1
838
6 GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe
operation of the fork lift truck. The neglect of regular servicing intervals can lead to
fork lift truck failure and constitutes a potential hazard to personnel and equipment.
m
The indicated servicing intervals are based on single-shift operation under normal
operating conditions. For applications in dusty environments, or involving large
temperature fluctuations or multiple-shift operation, the servicing intervals must be
shortened accordingly.
The following servicing checklist indicates the operations to be performed and the
respective intervals to be observed. The servicing intervals are defined as follows:
W1 = every 50 operating hours, but at least once per week
M3 = every 500 operating hours, but at least every 3 months
M6 = every 1000 operating hours, but at least every 6 months
M12 = every 2000 operating hours, but at least every 12 months
In the running-in phase of the truck, the following additional operations have to be
carried out:
1. Inspection
After the first 50 to 100 operating hours, at the latest after four weeks:
– Retighten battery terminal screws and check condition of cell connectors.
– Perform visual checks of electrical and mechanical components.
– Check brake fluid.
– Check brake system for leaks and brake lines for free routing.
– Check lifting chains for uniform tension.
– Check locking and limits of fork arms.
– Check transmissions for leaks.
– Check screw connections and mechanical safety devices for tight seat.
– Check wheel nuts for tight seat and retighten, if required.
– Check hydraulic connections for leaks and retighten, if required.
– Check hydraulic and travel speed setting as well as inductive guidance and function
of the stationary equipment.