Jungheinrich ERE 120n, Руководство по эксплуатации

Страница: 43 / 93

111
3
.G
B
E 14
Starting the truck for the first time
When the main switch is turned on the LED (16) goes red.
When you enter the correct operator code (factory setting 2-5-8-0) the LED (16) turns
green.
If the wrong code is entered LED (16) flashes red for two seconds. The correct code
can then be entered.
Z
The Set key (17) has no function in operating mode
Switching off
To switch the truck off, press the
o
key (21).
Z
The truck can switch off automatically after a
pre-determined time. To do this, the corre-
sponding code lock parameter must be set
(refer to section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
18
17
16
21
20 19
111
3
.G
B
E 14
Starting the truck for the first time
When the main switch is turned on the LED (16) goes red.
When you enter the correct operator code (factory setting 2-5-8-0) the LED (16) turns
green.
If the wrong code is entered LED (16) flashes red for two seconds. The correct code
can then be entered.
Z
The Set key (17) has no function in operating mode
Switching off
To switch the truck off, press the
o
key (21).
Z
The truck can switch off automatically after a
pre-determined time. To do this, the corre-
sponding code lock parameter must be set
(refer to section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
18
17
16
21
20 19