Jungheinrich EKS 110 Скачать руководство пользователя страница 53

Страница: 53 / 121

9 EN

4.6

Lifting and lowering in pedestrian touch mode

In pedestrian touch mode lifting and lowering can be operated from either side of the
truck as an optional feature.

On trucks with forks (version L) the entire operator platform rises or lowers with the
forks in pedestrian touch mode lifting/lowering.

On trucks with an auxiliary mast (version Z) the auxiliary mast forks rise or lower in
pedestrian touch mode lifting/lowering.

4.6.1 Lifting and lowering the operator platform (version L)

Lifting

CAUTION!

Risk of trapping

Steering set straight-ahead.

The operator must always stand beside the truck during pedestrian operation.

There must be no persons standing between the truck and any obstacles.

There must be no persons on the operator platform.

Procedure

• Press the lift button (8) until you reach the desired lift height.

For safety reasons the height of the forks is restricted to 625 mm.

Lowering

WARNING!

Ensure there are no other people standing underneath the raised load and driv-
er's cab.

Do not stand on the load handler.

Do not lift other people on the load handler.

Instruct other people to move out of the hazardous area of the truck.

The operator must stand outside the geometry of the truck and the load.

Procedure

• Press the lower button (7). The operator platform and forks lower.

9 EN

4.6

Lifting and lowering in pedestrian touch mode

In pedestrian touch mode lifting and lowering can be operated from either side of the
truck as an optional feature.

On trucks with forks (version L) the entire operator platform rises or lowers with the
forks in pedestrian touch mode lifting/lowering.

On trucks with an auxiliary mast (version Z) the auxiliary mast forks rise or lower in
pedestrian touch mode lifting/lowering.

4.6.1 Lifting and lowering the operator platform (version L)

Lifting

CAUTION!

Risk of trapping

Steering set straight-ahead.

The operator must always stand beside the truck during pedestrian operation.

There must be no persons standing between the truck and any obstacles.

There must be no persons on the operator platform.

Procedure

• Press the lift button (8) until you reach the desired lift height.

For safety reasons the height of the forks is restricted to 625 mm.

Lowering

WARNING!

Ensure there are no other people standing underneath the raised load and driv-
er's cab.

Do not stand on the load handler.

Do not lift other people on the load handler.

Instruct other people to move out of the hazardous area of the truck.

The operator must stand outside the geometry of the truck and the load.

Procedure

• Press the lower button (7). The operator platform and forks lower.

Содержание EKS 110


























































































































Результаты поиска

Содержание EKS 110

Отзывы:

Бренды по названию

Популярные бренды

Jungheinrich EKS 110, Руководство по эксплуатации

Результаты поиска

Содержание EKS 110

Отзывы:

Бренды по названию

Популярные бренды