Jungheinrich EKS 110 Скачать руководство пользователя

Страница: 48 / 121

9 EN

4.3

Travelling in pedestrian touch mode (

)

CAUTION!

Risk of trapping

Steering set straight-ahead.

The operator must always stand beside the truck during pedestrian operation.

There must be no persons standing between the truck and any obstacles.

There must be no persons on the operator platform.

Procedure

• Press the “Pedestrian drive direction” button (9). The truck travels in the drive di-

rection at a fixed speed of approximately 2.5 km/h (slow travel).

• Press the “Pedestrian fork direction” button (10). The truck travels in the load direc-

tion at a fixed speed of approximately 2.5 km/h (slow travel).

If the operator leaves the truck during pedestrian mode, the truck must be secured
to prevent it from accidental operation.

• Press the Emergency Disconnect (19).

9 EN

4.3

Travelling in pedestrian touch mode (

)

CAUTION!

Risk of trapping

Steering set straight-ahead.

The operator must always stand beside the truck during pedestrian operation.

There must be no persons standing between the truck and any obstacles.

There must be no persons on the operator platform.

Procedure

• Press the “Pedestrian drive direction” button (9). The truck travels in the drive di-

rection at a fixed speed of approximately 2.5 km/h (slow travel).

• Press the “Pedestrian fork direction” button (10). The truck travels in the load direc-

tion at a fixed speed of approximately 2.5 km/h (slow travel).

If the operator leaves the truck during pedestrian mode, the truck must be secured
to prevent it from accidental operation.

• Press the Emergency Disconnect (19).

Содержание EKS 110


























































































































Результаты поиска

Содержание EKS 110

Отзывы:

Похожие инструкции для EKS 110

Бренды по названию

Популярные бренды

Jungheinrich EKS 110, Руководство по эксплуатации

Результаты поиска

Содержание EKS 110

Отзывы:

Похожие инструкции для EKS 110

Бренды по названию

Популярные бренды