Jungheinrich EJE KmS 16, Руководство по эксплуатации

Страница: 32 / 45

E 11
020
1.G
B
4.5 Safe parking of the truck
If the truck is left unattended, even for
only short periods of time, it must be
rendered safe. Proceed as follows to
render the truck safe:
– Park the truck on level ground.
– Completely lower the fork.
– Set the key switch (3) to position
“0” and remove the key from the
switch.
– Set the master switch (9) to posi-
tion “Off”.
5 Fault location
This chapter enables the operator to locate and rectify minor faults and malfunctions,
or the effects of operating errors, himself. When trying to locate a fault, proceed in the
order as shown in the table.
A
If it was not possible to eliminate the fault by performing the remedial actions indicat-
ed above, please inform the manufacturer’s service organisation as more intricate
faults can only be rectified by specially trained and qualified service staff.
Fault Possible cause Remedial action
Truck does
not move – Battery connector not con-
nected.
– Master switch (emergency
stop) depressed.
– Key switch in position “0”.
– Battery exhausted.
– Fuse defective.
– Check the battery connector and con-
nect if necessary.
– Release the master switch.
– Set the key switch to position “I”.
– Check the charging condition of the
battery and recharge if necessary.
– Check fuses F1 and 1F1.
Load can-
not be lifted – Truck not operative.
– Hydraulic oil level too low.
– Fuse defective.
– Perform all remedial actions listed un-
der the fault “Truck does not move”.
– Check the hydraulic oil level.
– Check fuse 2F1.
3
9
E 11
020
1.G
B
4.5 Safe parking of the truck
If the truck is left unattended, even for
only short periods of time, it must be
rendered safe. Proceed as follows to
render the truck safe:
– Park the truck on level ground.
– Completely lower the fork.
– Set the key switch (3) to position
“0” and remove the key from the
switch.
– Set the master switch (9) to posi-
tion “Off”.
5 Fault location
This chapter enables the operator to locate and rectify minor faults and malfunctions,
or the effects of operating errors, himself. When trying to locate a fault, proceed in the
order as shown in the table.
A
If it was not possible to eliminate the fault by performing the remedial actions indicat-
ed above, please inform the manufacturer’s service organisation as more intricate
faults can only be rectified by specially trained and qualified service staff.
Fault Possible cause Remedial action
Truck does
not move – Battery connector not con-
nected.
– Master switch (emergency
stop) depressed.
– Key switch in position “0”.
– Battery exhausted.
– Fuse defective.
– Check the battery connector and con-
nect if necessary.
– Release the master switch.
– Set the key switch to position “I”.
– Check the charging condition of the
battery and recharge if necessary.
– Check fuses F1 and 1F1.
Load can-
not be lifted – Truck not operative.
– Hydraulic oil level too low.
– Fuse defective.
– Perform all remedial actions listed un-
der the fault “Truck does not move”.
– Check the hydraulic oil level.
– Check fuse 2F1.
3
9