Jungheinrich EJE KmS 16, Руководство по эксплуатации

Страница: 41 / 45

020
1.G
B
F 8
6 Description of the servicing and maintenance operations
6.1 Preparing the truck for the performance of servicing and maintenance opera-
tions
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Park the truck and render it safe (refer to chapter E).
– Disconnect the battery plug so that the truck cannot be started by unauthorised per-
sons (refer to chapter D).
f
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter „Transportation
and commissioning“ have to be observed.
6.2 Opening the battery hood
Refer to chapter D.
6.3 Opening the front hood
– Park the truck and render it safe.
– Unlatch the cover lock (1); the wrench is stored in the battery compartment.
– Swivel the control shaft to the lower area.
– Lift the hood (2) off and deposit it next to the truck.
A
Installation is in the reverse order of steps.
1
2
020
1.G
B
F 8
6 Description of the servicing and maintenance operations
6.1 Preparing the truck for the performance of servicing and maintenance opera-
tions
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Park the truck and render it safe (refer to chapter E).
– Disconnect the battery plug so that the truck cannot be started by unauthorised per-
sons (refer to chapter D).
f
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter „Transportation
and commissioning“ have to be observed.
6.2 Opening the battery hood
Refer to chapter D.
6.3 Opening the front hood
– Park the truck and render it safe.
– Unlatch the cover lock (1); the wrench is stored in the battery compartment.
– Swivel the control shaft to the lower area.
– Lift the hood (2) off and deposit it next to the truck.
A
Installation is in the reverse order of steps.
1
2