Jungheinrich EJE KmS 16, Руководство по эксплуатации

Страница: 38 / 45

F 5
020
1.G
B
a) Wheel bolts to be first checked for tightness after approx. 100 operating hours, tighten, if
necessary.
b) Hydraulic connections to be first checked for leakage after approx. 100 operating hours;
tighten, if necessary.
c) First change after 500 operating hours.
A
The maintenance intervals refer to normal service conditions. In case of aggravated
conditions, the intervals must be reduced as required.
Maintenance intervals
standard =
t
W M M M
cold store =
k
1 3 6 12
Battery: 10.1 Check acid density, acid level and cell voltage
l t
10.2 Check the terminals for secure attachment and apply
grease
l t
10.3 Clean battery connections, check for tight seat
l t
10.4 Check the battery cables for damage, renew, if necessary
t
Lubricati-
on: 11.1 Grease the vehicle in accordance with the lubrication
schedule
l t
General
measure-
ments: 12.1 Check the electrical system for a grounding fault
t
12.2 Check the driving speed and braking distance
t
12.3 Check the lifting and lowering speed
t
12.4 Check safety and shutdown devices
t
Demonstra-
tion: 13.1 Perform a trial run under a nominal load
t
13.2 Upon completion of servicing operations, demonstrate the
vehicle to the person responsible
l t
F 5
020
1.G
B
a) Wheel bolts to be first checked for tightness after approx. 100 operating hours, tighten, if
necessary.
b) Hydraulic connections to be first checked for leakage after approx. 100 operating hours;
tighten, if necessary.
c) First change after 500 operating hours.
A
The maintenance intervals refer to normal service conditions. In case of aggravated
conditions, the intervals must be reduced as required.
Maintenance intervals
standard =
t
W M M M
cold store =
k
1 3 6 12
Battery: 10.1 Check acid density, acid level and cell voltage
l t
10.2 Check the terminals for secure attachment and apply
grease
l t
10.3 Clean battery connections, check for tight seat
l t
10.4 Check the battery cables for damage, renew, if necessary
t
Lubricati-
on: 11.1 Grease the vehicle in accordance with the lubrication
schedule
l t
General
measure-
ments: 12.1 Check the electrical system for a grounding fault
t
12.2 Check the driving speed and braking distance
t
12.3 Check the lifting and lowering speed
t
12.4 Check safety and shutdown devices
t
Demonstra-
tion: 13.1 Perform a trial run under a nominal load
t
13.2 Upon completion of servicing operations, demonstrate the
vehicle to the person responsible
l t