Jungheinrich EJE KmS 16, Руководство по эксплуатации

Страница: 31 / 45

020
1.G
B
E 10
4.3 Picking up and setting down loads
m
Before picking up a load, the driver has to make sure that it is correctly palletised and
that the capacity of the truck is not exceeded.
– Pass the lifting device as far as possible under the load.
m
Pick up the load, ensuring that it does not project excessively from the tips of the lifting
device (less than 50 mm).
Lifting and lowering
A
When operating the keys “Lifting” or “Lowering”, the lifting or lowering movement will
be at a fixed speed.
Lifting
– Depress operating key “Lifting” (5).
– Keep the operating key depressed until the required lifting height has been
reached.
A
When the limit stop is contacted at the end of the lifting movement, the pressure lim-
iting valve will respond (noise emission).
Lowering
– Depress operating key “Lowering” (4).
m
Avoid impacting of the load to prevent damage to the load and racking.
4.4 Order picking up to the second level (
o
)
The driver standing platform is designed in such a way that by holding on to the han-
dle and by using the step, the driver can climb on to the battery cover.
f
When performing order picking operations at the second level, the driver must hold
on to the handle and not to the control shaft. No controls must be operated when en-
gaged in order-picking activities.
5
4
5
4
020
1.G
B
E 10
4.3 Picking up and setting down loads
m
Before picking up a load, the driver has to make sure that it is correctly palletised and
that the capacity of the truck is not exceeded.
– Pass the lifting device as far as possible under the load.
m
Pick up the load, ensuring that it does not project excessively from the tips of the lifting
device (less than 50 mm).
Lifting and lowering
A
When operating the keys “Lifting” or “Lowering”, the lifting or lowering movement will
be at a fixed speed.
Lifting
– Depress operating key “Lifting” (5).
– Keep the operating key depressed until the required lifting height has been
reached.
A
When the limit stop is contacted at the end of the lifting movement, the pressure lim-
iting valve will respond (noise emission).
Lowering
– Depress operating key “Lowering” (4).
m
Avoid impacting of the load to prevent damage to the load and racking.
4.4 Order picking up to the second level (
o
)
The driver standing platform is designed in such a way that by holding on to the han-
dle and by using the step, the driver can climb on to the battery cover.
f
When performing order picking operations at the second level, the driver must hold
on to the handle and not to the control shaft. No controls must be operated when en-
gaged in order-picking activities.
5
4
5
4