Jungheinrich EJB 14, Руководство по эксплуатации

Страница: 41 / 49

099
9.G
B
F 4
4 Maintenance checklist
a) First check of the wheel nuts after approx. 100 operating hours for tight fit. Re-tighten if
necessary. For starting torque, see maintenance plan.
b) Hydraulic connections to be first checked for leakage after approx. 100 operating hours;
tighten, if necessary.
c) 1. exchange after 500 hours of operation / if required, change coarse sieve.
d) Check the wheel arm fastening screws for the first time after approx. 100 operating hours
and re-tighten, if necessary. For starting torque, see maintenance plan.
A
The maintenance intervals refer to normal service conditions. If you are working un-
der difficult conditions, reduce the intervals, if required.
Maintenance intervals
Standard =
t
W M M M
Cold-stora-
ge depot =
k
1 3 6 12
Chassis/
Design: 1.1 Check all load bearing elements for damage
t
1.2 Check all bolted connections d)
t
Drive unit: 2.1 Check the transmission for noises and leakage
t
2.2 Check the transmission oil level
t
2.3 Change the gear oil
k t
Wheels: 3.1 Check for wear and damage
t
3.2 Check seating and attachment a)
k t
Steering: 4.1 Check the steering clearance
t
Brake
system: 5.1 Check for correct function and adjustment
k t
5.2 Check the return spring for repositioning function and
damage
t
5.3 Check the brake linings for wear
t
5.4 Check the brake linkage; adjust and grease,
if necessary
k t
Hoist frame: 6.1 Visual check of rollers, slide pieces and stops
k t
6.2 Check fork tines and fork carrier for wear and damage
k t
6.3 Check secure attachment of hoist frame
t
6.4 Check lift chains and chain guide for wear, adjust and
grease them.
t
6.5 Check the lateral clearance of the mast profiles and
whether they are parallel to each other
t
6.6 Check safety devices for proper attachment
and damages
k t
Lifting device: 7.1 Check function, wear and tear and adjustment
t
7.2 Visual check of rollers, slide pieces and stops
k t
7.3 Check fork tines and fork carrier for wear and damage
k t
Hydr. system: 8.1 Check function
k t
8.2 Check all connections for leakage and damage b)
k t
8.3 Check hydraulic cylinders for leakage, damage and
secure attachment
k t
8.4 Check the oil level
k t
8.5 Change hydraulic oil c)
k t
8.6 Change filter
t
8.7 Check the pressure relief valves for correct functioning
k t
099
9.G
B
F 4
4 Maintenance checklist
a) First check of the wheel nuts after approx. 100 operating hours for tight fit. Re-tighten if
necessary. For starting torque, see maintenance plan.
b) Hydraulic connections to be first checked for leakage after approx. 100 operating hours;
tighten, if necessary.
c) 1. exchange after 500 hours of operation / if required, change coarse sieve.
d) Check the wheel arm fastening screws for the first time after approx. 100 operating hours
and re-tighten, if necessary. For starting torque, see maintenance plan.
A
The maintenance intervals refer to normal service conditions. If you are working un-
der difficult conditions, reduce the intervals, if required.
Maintenance intervals
Standard =
t
W M M M
Cold-stora-
ge depot =
k
1 3 6 12
Chassis/
Design: 1.1 Check all load bearing elements for damage
t
1.2 Check all bolted connections d)
t
Drive unit: 2.1 Check the transmission for noises and leakage
t
2.2 Check the transmission oil level
t
2.3 Change the gear oil
k t
Wheels: 3.1 Check for wear and damage
t
3.2 Check seating and attachment a)
k t
Steering: 4.1 Check the steering clearance
t
Brake
system: 5.1 Check for correct function and adjustment
k t
5.2 Check the return spring for repositioning function and
damage
t
5.3 Check the brake linings for wear
t
5.4 Check the brake linkage; adjust and grease,
if necessary
k t
Hoist frame: 6.1 Visual check of rollers, slide pieces and stops
k t
6.2 Check fork tines and fork carrier for wear and damage
k t
6.3 Check secure attachment of hoist frame
t
6.4 Check lift chains and chain guide for wear, adjust and
grease them.
t
6.5 Check the lateral clearance of the mast profiles and
whether they are parallel to each other
t
6.6 Check safety devices for proper attachment
and damages
k t
Lifting device: 7.1 Check function, wear and tear and adjustment
t
7.2 Visual check of rollers, slide pieces and stops
k t
7.3 Check fork tines and fork carrier for wear and damage
k t
Hydr. system: 8.1 Check function
k t
8.2 Check all connections for leakage and damage b)
k t
8.3 Check hydraulic cylinders for leakage, damage and
secure attachment
k t
8.4 Check the oil level
k t
8.5 Change hydraulic oil c)
k t
8.6 Change filter
t
8.7 Check the pressure relief valves for correct functioning
k t