background image

099

9.G

B

E 10

Emergency lowering system

f

The emergency lowering system may only be used if there are no persons within the
danger zone.

If the lifting device can no longer be lowered due to a defect in the lifting control sy-
stem, the emergency lowering system has to be activated.

– Set key switch  (2) to its "0" position

and set the master switch (1) to its
"OFF" position.

– Pull the battery connector (see chap-

ter D).

– Open the front hood (see chapter F).
– Loosen the screw on the valve group

(13).

A

The required Allen key (2.5 mm) can be
found at the valve group.

The lifting device is lowered.

– Retighten the screw (13) after the

emergency lowering procedure has been performed.

f

The truck may only be retaken into service after the required troubleshooting measu-
res were successfully performed.

4.4

Safe parking of the truck

If the truck is left unattended, even for only short periods of time, it must be rendered
safe.

f

Do not park the truck on slopes! The lifting device must always be completely lowe-
red.

– Bring control shaft (4) into brake position (B).
– Lowering the lifting device.
– Set key switch (2) to "0" position and remove the key.
– Set master switch (1) to "OFF" position.

13

099

9.G

B

E 10

Emergency lowering system

f

The emergency lowering system may only be used if there are no persons within the
danger zone.

If the lifting device can no longer be lowered due to a defect in the lifting control sy-
stem, the emergency lowering system has to be activated.

– Set key switch  (2) to its "0" position

and set the master switch (1) to its
"OFF" position.

– Pull the battery connector (see chap-

ter D).

– Open the front hood (see chapter F).
– Loosen the screw on the valve group

(13).

A

The required Allen key (2.5 mm) can be
found at the valve group.

The lifting device is lowered.

– Retighten the screw (13) after the

emergency lowering procedure has been performed.

f

The truck may only be retaken into service after the required troubleshooting measu-
res were successfully performed.

4.4

Safe parking of the truck

If the truck is left unattended, even for only short periods of time, it must be rendered
safe.

f

Do not park the truck on slopes! The lifting device must always be completely lowe-
red.

– Bring control shaft (4) into brake position (B).
– Lowering the lifting device.
– Set key switch (2) to "0" position and remove the key.
– Set master switch (1) to "OFF" position.

13

Содержание EJB 14


















































Отзывы: