Jung FP 701 CT, Руководство по эксплуатации

Страница: 7 / 12

KNX Facility-Panel
Ref.-no.: FP 701 CT
•
Accept the entry by pressing Save . Invalid entries will not be
accepted.
Setting the time of day
•
Open the Service page.
•
Open System settings .
•
Select Time of day .
•
Enter the current time of day. Sequence: HH:MM.
L
Enter the time of day in the 24 hour mode.
•
Accept the entry by pressing Save. Invalid entries will not be
accepted.
Setting the day of week
•
Open the Service page.
•
Open System settings .
•
Select Day of the week , select the current day of the week Accept
the entry by pressing Save .
Viewing the message list
•
Open the Service page
•
Open System settings
•
Select message list. The device will display the current fault
messages.
Viewing the service address
•
Open the Service page.
•
Open System settings .
•
Select Service address . The pre-set maintenance will be
displayed.
Changing the colour settings
The colour setting is visible only if programmed.
•
Open the Service page.
•
Open System settings .
•
Select Colour settings . Select desired colour scheme. Accept the
entry by pressing Save .
Resetting to default
•
Open the Service page.
•
Select Administrator .
•
Select Default settings . A confirmation request appears on the
screen asking whether the default setting is to be restored and
whether all user data is to be deleted.
•
In case the user data is not to be deleted: Press No .
•
In case the default setting is to be restored: Press Yes . The device
initializes, the setting will be restored to default. Light scenes will be
deleted (names and values). Timer data will be deleted. Selected
7