KNX Facility-Panel
Ref.-no.: FP 701 CT
Figure 4, installation into a flush-mounting box
Install the device in flush-mounting box (17). Use enclosed
screws (15).
Attach design frame (16) and press on.
Connecting external pushbuttons
There is the option to connect, for example, external pushbuttons.
Use pushbutton cable. Line length max. 1,20 m.
Connect pushbuttons. Pay attention to correct assignment.
Connect pushbutton cable to
Ext
. terminal (11). Pin assignment
figure 5.
Pin-Nr. (Bild 5)
Funktion
1 GND
2
Key 1 – arrow up
3
Key 2 – arrow down
4
Key 3 – function key 1
5
Key 4 – function key 2
6
Key 5 – function key 3
7
Key 6 – function key 4
8 Not
allocated
5.2. Startup
Downloading the physical address
The device must have been connected and ready for use..
Programming key (10) and LED (9) on the bottom side of the device must
be accessible.
Configuration and startup with ETS2 version 1.3a or ETS3.0d.
10