KNX Facility-Panel
Ref.-no.: FP 701 CT
Opening the service page
Starting form the service page, pages for the screen and system settings
as well as the cleaning function can be accessed.
•
Press
the
Service page
function key.
The Service page branches to the sub pages
Display settings
,
System
settings
and
Administrator
.
Setting the touch accuracy
•
Open the Service page.
•
Press
Display settings
.
•
Press
Touch calibration
. The screen displays several points in
sequence.
•
Press the middle of the displayed point.
•
The screen will automatically terminate the calibration.
Cleaning the screen
The device features a special cleaning function in order to avoid
activating unintentional
functions when removing dirt, finger prints etc.. While the cleaning
function is active,
touching the screen surface will cause no action.
•
Open the Service page.
•
Activate
Cleaning function
. The touch will not be evaluated for the
duration of 1 minute. The device displays the remaining cleaning
time on the screen. The device will return to the service page once
the cleaning time has ended.
•
Clean the screen surface with a soft cloth. If needed, moisten the
cleaning cloth.
L
Do not use sharp objects for cleaning.
L
Do not use strong cleaning agents, acids or organic solvents.
L
Keep moisture from penetrating into the device.
Adjusting basic brightness
The screen will switch into the energy saving basic brightness after
several minutes of nonuse.
•
Open the Service page.
•
Press
Display settings
.
•
Press
Brightness settings
.
•
Select
basic
brightness:
Bright
,
Dim
or
Off
.
The new setting will be visible as soon as the device switches back into
the basic brightness
Setting the date
•
Open the Service page.
•
Open
System settings
.
•
Select
Date
.
•
Enter the current date. Sequence: DD.MM.YYYY.
6