KNX Facility-Panel
Ref.-no.: FP 701 CT
Operation instructions
Facility-Panel
1. Safety warnings
Electrical equipment must be installed and fitted by qualified
electricians only and in strict observance of the relevant accident
prevention regulations. Cut out the circuit breaker before working
on the device – risk of electric shock. Do not touch the display with
sharp or pointed objects. The touch sensitive surface could be
damaged. Do not use sharp objects for cleaning. Do not use strong
cleaning agents, acids or organic solvents. Failure to observe the
instructions may cause damage to the device and result in fire and
other hazards. These instructions are part of the product and must
be left with the customer.
2. Technical overview
(1) Touch-Screen-surface
3. Function
3.1. System information
This device is a product of the KNX system and complies with KNX
directives. Technical knowledge obtained in KNX training is a necessary
prerequisite. The functionality of this device depends on the software.
Information on loadable software and attainable functionality as well as
the software itself can be obtained from the manufacturer’s product
database. Planning, installation and startup of the device takes place via
KNX certified software. You will find the most current product database,
Stand: Aug-07 3
25 633 03
