Saving ambient brightness as brightness threshold
The ambient brightness can be saved as brightness threshold with the aid of the teach function.
i
Do not shadow the motion detector during the measuring process.
Motion detector is in automatic operation.
o
Press
É
button.
Teach function is activated. For confirmation, the switched on light is switched off. If the
light is switched off, this is switched on for approx. 1 second.
After 30 seconds, the motion detector measures the brightness and saves it. For
confirmation, the light is switched on for the duration of the run-on time.
i
If a value greater than 200 lux is saved, the motion detector switches to day operation
independent of the brightness.
Setting fixed run-on time
o
Press
Ï
,
Ð
,
Ñ
or
Ò
button.
Setting individual run-on time
The individual run-on time can be set within a range of 10 seconds to 60 minutes. One of the
fixed run-on times can be set again at any time.
o
Press
Ó
button.
Run-on time starts.
o
When the required run-on time is reached, press
Ô
button.
Motion detector saves the run-on time.
Switching on short time operation
o
Press the
Î
button for longer than 10 seconds.
i
No run-on time is set in short time operation.
i
With the HVAC insert, the function is only executed for
Kanal 1
output.
i
To switch off short time operation, press
Reset
button for less than 10 seconds.a
Switching on dimming phase
The motion detector is combined with a dimming insert.
Dimming phase is switched off.
o
Press
Õ
button.
Dimming phase is switched on. If pressed again, the dimming phase is switched off again.
Switching on night light function
The motion detector is combined with a dimming insert.
The light is switched between two brightness values (see chapter 3. Function).
o
Press the
Ö
button for longer than 10 seconds.
i
To switch off the night light function, press
Reset
button for less than 10 seconds.
Configuring the motion detector for use outdoors
The motion detection is switched accordingly for use outdoors in order to minimise faulty
switching.
o
Press the
×
button for longer than 10 seconds.
The motion detection is optimized for use outdoors. If a motion is detected, the red LED (4)
flashes.
i
To reactivate the motion detection for indoors, press
Reset
button for less than 10
seconds.
Switch on test operation
The test operation is used for testing the detection area.
o
Press
Ù
button.
7/13
32576803
J:0082576803
03.05.2011
Light Management
Universal automatic switch 180° 2.20 m
