JUMO DELOS SI Скачать руководство пользователя страница 55

Страница: 55 / 58

12 Maintenance, cleaning and returns

Maintenance, cleaning and returns

12.1

Maintenance

The pressure transmitter is maintenance-free.
For this reason, repairs must be performed by the manufacturer only.

12.2

Manual cleaning for maintenance or storage

NOTE!
Avoid damage to the device due to improper cleaning.

Do not damage the pressure transmitter, especially the parts touched by medium.
Cleaning agent must not attack the surface and seals.

12.3

Returns

WARNING!

Injury to persons, damage to property, environmental damage

Measured material residues on the removed product can cause injury to humans, and damage to the
environment and equipment.



Take sufficient precautionary measures.

NOTE!

In case of abnormalities, please send the device to the manufacturer together with a completed decla-
ration of decontamination. You will find the declaration of decontamination on the website at:

http://productreturn.jumo.info

NOTE!

The product may only be disassembled in a safe, de-pressurized, and zero-voltage state by qualified
personnel.

Содержание DELOS SI



























































Результаты поиска

Содержание DELOS SI

Отзывы:

Похожие инструкции для DELOS SI

Бренды по названию

Популярные бренды

JUMO DELOS SI, Руководство по эксплуатации

Результаты поиска

Содержание DELOS SI

Отзывы:

Похожие инструкции для DELOS SI

Бренды по названию

Популярные бренды