Julabo DYNEO DD, Оригинальное руководство по эксплуатации

Страница: 88 / 96

Appendix
88
in_mode_08
Controller dynamics set with internal temperature control:
0 = Aperiodic
1 = Standard
in_mode_11
Actuating variable source:
0 = Circulator
1 = Serial
2 = Analog (EPROG)
IN PAR System response
in_par_00
Set sensor difference between working temperature sensor and
safety temperature sensor
in_par_01
Set time constant of the external bath TE
in_par_02
Set internal gradient value SI
in_par_03
Set time constant of the internal bath TI
in_par_04
Set optimization parameter CoSpeed
in_par_05
Ration of cooling/heating capacity pk to ph
in_par_06
Set control parameter Xp of the internal controller
in_par_07
Set control parameter Tn of the internal controller
in_par_08
Set control parameter Tv of the internal controller
in_par_09
Set control parameter Xp of the cascade-controller
in_par_10
Set control parameter Xpu of the subordinate controller (cascade
temperature control)
in_par_11
Set control parameter Tn of the cascade-controller
in_par_12
Set control parameter Tv of the cascade-controller
in_par_13
Set maximum permissible internal temperature InternMax in cascade
temperature control
in_par_14
Set minimum permissible internal temperature InternMin for cascade
temperature control
in_par_15
Set band limit upper in cascade temperature control
in_par_16
Set band limit lower in cascade temperature control