Julabo DYNEO DD, Оригинальное руководство по эксплуатации

Страница: 61 / 96

Operation
61
3. Press the [Start/Stop] softkey.

The unit starts the temperature control application at once. The temperature
control application can be stopped with the [Start/Stop] softkey. The
entered setpoint is saved.
 Observe the following for heating circulators:
For temperature control applications near or below the ambient
temperature: Use a cooling coil or JULABO immersion cooler.
8.4 Basic settings
8.4.1 Set language
The language of the operating interface can be switched to one of the available
languages.
 The device is switched on.
1. Call up the
<Main menu>
.
2. Call up the submenu <Settings> then menu option <Language> .
 The submenu
<Language>
lists all the languages installed on the device.
3. Select the desired language.

The selected language is immediately activated.
8.4.2 Set date and time
The date and time is preset ex works. This section describes how you can set the
date and time yourself.
 The device is switched on.
1. Call up the
<Main menu>
.
2. Call up the submenu <Settings> then menu option <Date/time> .
 The submenu shows the currently set date and time as well as selectable
display formats.
3. Set the date and time and then confirm your settings.
4. Save the settings with the
[Save + Esc] softkey.
5. Select one of the check boxes to display the date and time in a different
format.

The date and time are set.