Julabo DYNEO DD Скачать руководство пользователя страница 28

Страница: 28 / 96

Product description

5.9.6 Menu Connect unit

The device can be connected with a PC and remote controlled using the USB
interface or the optional RS232 interface. In addition to this, external
programmers can also be connected via optional analog interfaces. In the menu

<Connect

unit>

parameters for remote control mode can be set.

•  Remote control
•  Digital interfaces
•  External setpoint
•  Analog interfaces
•  Actuating variable
•  Start up behavior

5.9.7 Service menu

The menu

is reserved for JULABO service technicians and password

protected.

5.9.8 Install unit menu

In the menu

several basic settings are specified. Depending on

the device configuration, not all menu functions may be available.

•  Adjust external temperature sensor
•  Import and export device settings
•  Reset unit
•  Set power supply
•  Set chiller mode

Содержание DYNEO DD

































































































Результаты поиска

Содержание DYNEO DD

Отзывы:

Бренды по названию

Популярные бренды

Julabo DYNEO DD, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание DYNEO DD

Отзывы:

Бренды по названию

Популярные бренды