Julabo CORIO CP, Руководство по эксплуатации, Страница: 4 / 72

4
7.2 Connecting an external system .................................................... 37
7.2.1 Connect an external system with screw connections .............. 38
7.2.2 Connect an external system with barbed fittings ..................... 40
7.3 Set high temperature safety function ............................................ 41
7.4 Fill device ..................................................................................... 42
7.5 Set up power supply for the refrigerated circulator ....................... 42
7.6 Adjusting the flow of the bath fluid ................................................ 43
7.7 Set chiller mode ............................................................................ 44
7.8 Set temperature warning limits ..................................................... 44
8 Operation ......................................................................................... 46
8.1 Switch on the unit ......................................................................... 46
8.2 Switch off the unit ......................................................................... 46
8.3 Configuring setpoint temperature ................................................. 46
8.4 Activate autostart function ............................................................ 47
8.5 Record data .................................................................................. 48
8.5.1 Record measurement data ...................................................... 48
8.5.2 Reading out blackbox data ...................................................... 48
8.6 Adjust pump ................................................................................. 49
8.7 Remote control device .................................................................. 49
8.7.1 Remote control device using USB interface ............................ 49
8.7.2 Set interface parameters ......................................................... 50
8.7.3 Remote control device using RS232 interface ........................ 50
8.7.4 Request device status ............................................................. 51
8.8 Setting the timer ........................................................................... 51
8.9 Adjusting the temperature sensor (ATC) ...................................... 52
8.9.1 Adjust internal temperature sensor.......................................... 53
8.9.2 Enabling ATC function............................................................. 53
8.10 Device Reset ................................................................................ 54
9 Maintenance ..................................................................................... 55
9.1 Check safety symbols .................................................................. 55
9.2 Check the functionality of high temperature cut-off ...................... 55
9.3 Test the low liquid level safety function ........................................ 55
9.4 Replace detachable power cord ................................................... 56
9.5 Emptying ...................................................................................... 56
9.6 Clean device................................................................................. 57