Jula Meec tools 015654, Руководство по эксплуатации

Страница: 37 / 37

EN
37
REPLACING THE SAW BLADE
WARNING!
•
The saw blade can be very hot immediately after use – risk
of burns. Wait until the blade has cooled.
• Do not clean the blade with a flammable liquid.
• Wear gloves when handling the blade – risk of cut injuries.
• Exercise care to fit the saw blade in the right direction of
rotation.
1. Remove all the carriage bolts (E), washers and lock nuts on
the right-hand outer blade guard. Remove the right-hand
outer blade guard.
FIG. 30
2. Undo the 2 slotted screws with semi-circular heads, 2 spring
washers and 2 washers on the inner blade guard.
FIG. 31
3. Undo the 2 hex screws with semi-circular heads on the right-
hand inner blade guard.
FIG. 32
4. Hold the outer flange with one spanner and undo the nut
with the other spanner.
5. Remove the nut and the outer flange from the saw spindle.
6. Remove the saw blade from the saw spindle.
7. Clean the contact surfaces on:
– the saw spindle
– the inner flange (A)
– the saw blade (B)
– the outer flange (C)
– the nut (D)
FIG. 33
8. Fit a new saw blade. Check the correct direction of rotation.
WARNING!
Only use saw blades that satisfy the requirements in
accordance with EN 847-1:1997. Damaged or defective saw
blades can shatter and cause personal injury and/or material
damage.
STORAGE
• Keep this product out of the reach of children.
• Store the product so it cannot be started by unauthorised
persons and cannot cause personal injury.
• Do not store the product in damp conditions or unprotected
outdoors.
• Spray the saw blade with a suitable protective spray before
putting into storage.