Jula Meec tools 015654, Руководство по эксплуатации

Страница: 34 / 37

EN
34
• Keep at a safe distance from moving parts when the product
is in use.
• Do not remove chips or pieces from the area around the
blade with your hands.
• Always use the log cradle.
• Always keep both hands on log cradle handle when sawing.
• Work in the right position:
– In front of the product.
– To the side of the saw line.
• The log cradle must return completely to its home position
after each cut.
OPERATING CONDITIONS
The product is intended to be used in ambient temperatures
from 5 to 40°C and up to 1000 m above sea level. The relative
humidity should be less than 50% at 40°C. The product can be
stored and transported at ambient temperatures from –25 to
55°C.
SYMBOLS
Read the instructions.
Approved in accordance with the relevant
directives.
WARNING:
Wear ear protection.
Wear safety glasses.
Wear a face mask.
Wear safety gloves.
Wear safety shoes.
Do not expose to rain.
Risk of personal injury. Watch out for ejected
objects.
Keep at a safe distance.
Risk of personal injury.
Risk of electric shock.
Pull out the plug before adjusting, replacing
parts, cleaning or maintenance.
Sound power level, LwA.
Recycle end-of-life product in accordance with
local regulations.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Output 2200 W
Speed
2800 rpm
Protection rating IP54
Sawing capacity Ø30–135 mm
Saw blade* Ø405 mm x Ø30 mm x 3.2 mm x 32 T
Sound pressure level, LpA 92.0 dB(A), K=2 dB
Sound power level, LwA 104 dB(A), K=2 dB
Weight 43 kg
*
Only use saw blades that satisfy the requirements in accordance with
EN 847-1:1997.
Always wear ear protection.
The declared values for vibration and noise, which have been
measured according to a standardised test method, can be used
to compare different tools with each other and for a preliminary
assessment of exposure. The measurement values have been
determined in accordance with EN ISO 3744:2010.
WARNING!
The actual vibration and noise level when using tools may
differ from the specified maximum value, depending on how
the tool is used and the material. It is therefore necessary to
determine which safety precautions are required to protect
the user, based on an estimate of exposure in actual operating
conditions (taking into account all stages of the work cycle,
104