JUKI LK-1900B/IP-420, Инструкция по эксплуатации

Страница: 101 / 144

– 97 –
③ Input the inspection time.
When the inspection time is set to "0", the
maintenance inspection function stops.
When clear button D is pressed, the value
returns to the initial value. The initial values of the
inspection time of respective items are as follows.
･
Needle replacement : 0 (1,000 stitches)
･ Cleaning time : 0 (hour)
･ Oil replacement time : 0 (hour)
When ENTER E button is pressed, the
inputted value is determined.
27-3 Releasing procedure of the warning
When the designated inspection time is reached, the
warning screen is displayed.
In case of clearing the inspection time, press CLEAR
button
F
. The inspection time is cleared
and the pop-up is closed. In case of not clearing
the inspection time, press CANCEL button G
and close the pop-up. Every time one sewing is
completed, the warning screen is displayed until the
inspection time is cleared.
Warning Nos. of the respective items are as follows.
･ Needle replacement : A201
･ Cleaning time : A202
･ Oil replacement time : A203
D
E
G
F