JUKI LK-1900B/IP-420, Инструкция по эксплуатации

Страница: 25 / 144

– 21 –
8. CHANGING THREAD TENSION COMMAND AT EVERY NEEDLE ENTRY POINT
8-1 Adding or changing thread tension command at every needle entry point
① Display the thread tension command change screen
When selecting a standard pattern, user pattern
or a pattern stored on a medium, press thread
tension button A on the sewing screen to
display the thread tension setting screen. Press
THREAD TENSION COMMAND CHANGE button
B on the thread tension setting screen and
the thread tension command change screen is
displayed.
The sewing machine does not start even
when the foot switch is depressed under
this mode.
②
Specify the command position you desire to
change.
Specify the position you desire to add the thread
tension command or that you desire to change
the thread tension command value with ONE
STITCH BACKWARD button
C
or ONE
STITCH FORWARD button D in the state
that the presser is lowered.
In addition, the machine moves to the needle
entry point where the front or rear thread tension
command exists with E or F . When
you desire to stop the move, press STOP button
G .
When ORIGIN MOVE button H is pressed,
the machine moves to the origin.
The value to be displayed is the absolute value
(thread tension value + thread tension command
value).
A
B
C
E
F G
H
D