JUKI LK-1900B/IP-420, Инструкция по эксплуатации

Страница: 94 / 144

– 90 –
26-5 Take-in of the data
① Display the communication screen.
When communication switch
A
of switch
seat section is pressed in the data input screen,
the communication screen is displayed.
A
F
B
D
C
E
G
②
Select the communication procedure.
There are four communication procedures as
described below.
B :
Writing data from media to panel
C :
Writing data from personal computer (server)
to panel
D : Writing data from panel to media
E :
Writing data from panel to personal computer
(server)
Select the button of communication procedure
you desire.
③ Select the data No.
When F is pressed, the writing file selection
screen is displayed.
Input the file No. of the data you desire to write.
For the file No., input the numerals of the part xxx
of VD00xxx .vdt of the file name.
Designation of the pattern No. of writing
destination can be performed in the same way.
When the writing destination is the panel,
pattern Nos. which have not been registered are
displayed.
④ Determine the data No.
When ENTER button G is pressed, the data
No. selection screen is closed and the selection
of the data No. has been completed.