JUKI IP-420, Инструкция по эксплуатации, Страница: 93 / 139

– 89 –
6-5. Pattern writing
Pattern data s wrtten.
(1) Write the pattern data.
1
Select the pattern writing.
When PATTERN WRITING button s pressed n the
standard screen, the pattern wrtng screen s dsplayed.
2
Specify the pattern No.
Specfy the pattern No. of wrtng destnaton wth TEN key
to
A
, or + or - key
B
. When + or - key
s pressed, the No. whch s open next s dsplayed.
In the case where the thread trimming command
does not exist in the termination of the pattern
and before jump feed, the automatic thread
trimming insertion confirmation screen is
displayed after pressing ENTER button
C
, and inserting thread trimming
F
or not
inserting
G
can be selected.
When either button is pressed, the pattern writing
is executed.
3
Execute the pattern writing.
When ENTER button
C
s pressed, the created pattern
data s wrtten to the nputted No., and the screen returns to
the standard screen. When the pattern data of the specified
pattern No. already exists, the overwriting confirmation screen
s dsplayed, and the pattern wrtng s executed after pressng
ENTER button
E
.
When OBJECT MEDIA SELECTION button
D
s
pressed, the object meda settng screen s dsplayed, and the
meda to be the object of wrtng can be selected.
Settng procedure s the same as that of the pattern readng.
F G
Use the media which has been formatted with IP-420.
C
A
D
B
E