JUKI IP-420, Инструкция по эксплуатации, Страница: 38 / 139

– 34 –
3
Move the needle position.
When MOVE key
G
n the coordnate nput screen
is pressed, the needle position moves in the specified
drecton.
4
Input the coordinate.
When the needle position has moved to the specified position
and DECIDING POINT button
H
s pressed, the poston
s nputted as the shape pont (passng pont).
It s possble to nput by repeatng the steps of
3
and
4
as
well.
5
End setting of the linear zigzag sewing.
When ENTER button
I
s pressed, the set data s
nputted, and the screen returns to the standard screen.
DECIDING POINT button of the last pont can be omtted.
Settng procedure of the zgzag sewng of other shapes s the
same as that of the lnear zgzag sewng.
Coordnate nputtng procedure of the respectve sewngs s
the same as that of the ordnary sewng.
H
G
I
No. Button
Type of direction to
start sewing
Description Example
1 Leftward of the
center of sttch base
lne Sewng s started from the left sde toward
the drecton of travel wth the sttch base lne
set at the center of zgzag wdth. Sttches are
produced n the zgzag form.
2 Rghtward of the
center of sttch base
lne Sewng s started from the rght sde toward
the drecton of travel wth the sttch base lne
set at the center of zgzag wdth. Sttches are
produced n the zgzag form.
3 Leftward of the end
of sttch base lne Sewng s started from the left sde wth the
sttch base lne set at the rght end of zgzag
wdth toward the drecton of travel.
4 Rghtward of the end
of sttch base lne Sewng s started from the rght sde wth the
sttch base lne set at the left end of zgzag wdth
toward the drecton of travel.
Zigzag sewing starting method list