JUKI IP-420 Скачать руководство пользователя страница 138

Страница: 138 / 139

– 134 –

The list is the message screen displayed for confirmation of

execution of processing in the body input mode.

Message No. is displayed at

, pictograph showing the description

of message at

, and message at

in the message screen.

Press ENTER button

to continue processing, and press

CANCEL button

to cancel.

Message list of the body input mode is described as shown in the
list below.

23. MESSAGE LIST

Message No.

M501

M502

M503

M504

M505

M507

M508

Description of message

Erase confirmation

Erasing is performed. OK ?

Point change confirmation

Point change is performed. OK ?

• When the shape of the element is not kept, it is changed to the point.

Overwriting confirmation

Overwriting is performed. OK ?

Execution confirmation

Execution is performed. OK ?

Thread trimming insertion confirmation

Thread trimming is automatically inserted. OK ?
• This error No. is displayed when there is no thread trimming at the end of

sewing or before jump feed.

Presser move confirmation

Presser is moved. OK ?
• Presser moves linearly. It interferes with the obstacle when there is any

on the way.

Input mode conversion confirmation

Mode is converted to input mode. Create data newly ?

Display

Содержание IP-420












































































































































Результаты поиска

Содержание IP-420

Отзывы:

JUKI IP-420, Инструкция по эксплуатации, Страница: 138 / 139

Результаты поиска

Содержание IP-420

Отзывы: