JUKI IP-420, Инструкция по эксплуатации, Страница: 65 / 139

– 61 –
The pattern data of the specified section is deleted in needle entry point unit. There are two methods of
RELATIVE POINT DELETION AND ABSOLUTE POINT DELETION dependng on
movng of the pattern data after the deleted pont.
Pont deleton can delete not only the pattern data whch s created wth pont sewng nput, but also the
data nputted wth any functon such as lnear sewng or the lke.
To perform the modification of the pattern, move the needle position to the modifying position using
beforehand FEED BACKWARD key or FEED FORWARD key n the standard screen.
5-1. Point modification
(1) Point deletion (070 and 074)
5. MODIFICATION OF THE PATTERN
1
Select the relative point deletion.
Select and execute RELATIVE POINT DELETION (functon
code 070)
n the code lst screen.
2
Specify the relative point deletion range.
Move the needle poston and specfy the secton of the
deletng ponts by pressng FEED BACKWARD key
B
or FEED FORWARD key
C
, and press ENTER button
D
.
3
Confirm the point change.
The point change confirmation screen shows that the point
change may be changed to the pont sewng. In case of
contnung, press ENTER button
A
, and the pont
deletion confirmation screen is displayed.
A
C B
D